Recent Posts

What Makes Storm Damage Different Than Water Damage?

8/28/2022 (Permalink)

Pipe Burst Water damage tends to result from plumbing issues such as pipe breaks.

What Is the Difference Between Storm and Water Damage?

Storm damage differs from damage caused by other water sources in several significant ways. Water damage tends to result from plumbing issues such pipe breaks. Storm damage tends to be caused by heavy rains, high winds or flooded municipal mains and may result in damage to the interior. Here are a few broad distinctions between storm damage, such as flooding, and other water-related damage.

External Versus Internal

Storm damage tends to come from outside a home. This damage may originate from any of the following sources:

• Floods
• Roof leaks
• Broken windows

Other forms of damage caused by water tend to be plumbing-related and caused by internal systems. External water may be Category Two or Category Three depending on the source, whereas water from a supply line break is clean, treated Category One water.

Flooding or Leaks

Flood water is considered highly contaminated Category Three water. Flood damage may affect a crawlspace, basement, or ground level of a residence and increase the risk of mold growth and structural damage. Water from a roof leak may be slightly less contaminated but can still cause irreparable damage to porous building materials such as drywall or insulation.

Secondary Damage

Any type of damage that involves water will increase the risk of certain types of secondary damage. Mold growth is the most common consequence of water or storm damage. Mitigation and restoration professionals can quickly eliminate primary damage and minimize secondary damage.

These are a few major distinctions between storm and water damage. Another important factor to consider is that flooding is usually excluded from standard homeowners policies, whereas many other types of water and storm-related damage are covered as perils. If you are concerned that exposure to flood water will cause damage at a residence in Dickson, TX, you should obtain a flood insurance policy through the National Flood Insurance Program or a private insurer.

3 Reasons Secondary Damage Is a Serious Concern

8/23/2022 (Permalink)

Technician wearing a PPE outfit and pointing at a wall with black mold Protect your company from black mold and structural problems.

3 Reasons Why Secondary Damage Is a Major Concern

A little bit of water isn't going to hurt your property. This thought seems logical; water, after all, seems unlikely to cause harm; however, this notion is misleading and dangerous. Several serious conditions can occur when moisture settles into the structure, including black mold development and material rot.

Prompt reaction mitigates the potential for secondary problems. Owners, therefore, should take immediate action to handle the initial flooding properly, working swiftly with professional remediation experts in La Marque, TX. Avoid the following three serious concerns by using early clean-up procedures and interventions.

1. Elevated Moisture Causes High Humidity

Additional fluid exposure increases humidity levels. This dampness invades your walls, ceiling, air and floor, spreading saturation into hard-to-see places. In addition, the water brings with it fungal spores. When combined with organic material, these organisms thrive in wet locations and reproduce within one to two days. The room turns it a perfect host for mold growth.

2. Lingering Dampness Encourages Rot and Corrosion

Water damage devastates building structures. The water sits, soaking the wood and drywall, weakening these areas. As it begins to break down materials, so too do black mold spores growing and feasting on the pieces. Paint begins to flake, smells develop and wooden parts can crumble from brittleness.

Furthermore, pipes become vulnerable to corrosion. If not dried out, they become weaker and develop rust, leading to leaks or breaks.

3. Water Exposure Harms Electrical Systems

Another form of secondary damage is the threat of electrical risk. Your wires run within the walls, and sockets are exposed to the water. Appliances also become vulnerable. Moisture can seep into the sockets, and if wires have cracks or breaches, they can become harmed too. It's essential to have professionals identify any trouble and repair lines quickly and appropriately.

When overflows occur, protect your company from black mold and structural problems. Focus on minimizing secondary conditions by drying out the premises quickly and having specialists evaluate the situation.

How To Remove Smells From a Microwave

8/23/2022 (Permalink)

Cleaning Microwave Make a thorough cleaning of your microwaves.

How to Get Smells Out of a Microwave

You can't help but notice that stale, heavy smoke smell every time you walk into your kitchen in Nassau Bay, TX. Grease builds up in and around cooking appliances. Unfortunately, it doesn't just smell bad; it can also be a fire hazard. Proper cleaning will make all the difference.

Four Steps to a Clean Microwave

1. Deodorize Oven Interior 

You probably already have products that will remove food residue and stubborn odors. All of these are effective:

  • Vinegar
  • Lemon Juice
  • Baking Soda
  • Ground Coffee
  • Cloves

Use vinegar or lemon juice in a bowl of water. Heat for 2 minutes to soften buildup, then wipe interior surfaces with a damp cloth. 

Sprinkle baking soda onto a wet sponge and heat the sponge for 30 seconds. Wipe down with the warm sponge and baking soda, then rinse with warm water.

Place several tablespoons of ground coffee or cloves into a bowl and leave in the oven overnight. No need to heat.  Either one will effectively absorb the smoke smell and other odors.

2. Clean Exhaust Grill

If you have an over-the-range unit, you probably have an exhaust system that vents outdoors. You'll need to remove the vent grill and clean the vent. 
Soak the grill in detergent or a grease-cutting solvent and some hot water. Scrub the vent to remove any buildup. Use a toothbrush or some cotton swabs to get into the tight spots. Scrub the grill until it's clean and replaces.

3. Wash Grease Filter

You'll find this filter above your range and under your unit. It is a likely source of that smoke smell, and should be cleaned once a month. Remove the filter and soak in hot, soapy water. Then scrub it until it shines. 

4. Replace Charcoal Filter 

If your appliance doesn't vent outdoors, it may use a charcoal filter to absorb smells. If so, you'll need to replace this filter every six months.

With proper cleaning and maintenance, you will not only remove the smoke smell and other odors from your kitchen, but you'll also eliminate grease and reduce the risk of a residential fire.
 
 

Water Mitigation and Restoration a Two-Step Process

8/23/2022 (Permalink)

Water Category Assess the water loss and determine if it is Category 1, 2, or 3.

A Two-Step Approach to Water Mitigation and Restoration

No matter what you do, your La Marque, TX, the property isn’t immune from water damage. While efforts may be made to minimize the chances of it happening, an undetected supply line leaking or sudden broken pipe means dealing with an extensive amount of unwanted water. Pipe burst cleanup involves a two-step process: water mitigation and water restoration.

Mitigation: Assessment and Water Cleanup

After the initial loss, mitigation is the next step taken to minimize damage to the property. It typically involves an assessment, containing the damage and taking preventive measures to prevent secondary damage. Mitigation typically involves the following steps:

Locate the source of the water and stop it.

Assess the water loss and determine if it is Category 1, 2 or 3. The third category is considered black water, which requires more extensive cleaning measures.

The process of extracting the water and drying out affected areas begin.

Once the property is thoroughly dried, it will be cleaned, sanitized and deodorized.

Restoration: The Final Step

The last step of the pipe burst cleanup process is restoring the damaged areas to their preloss condition. The time and extent of those repairs will be determined by the extent of the damage. In severe cases, it may require the removal and replacement of drywall, carpeting, flooring and other structural components. Items that can be removed, such as furniture and documents, will be taken to a secure location to be cleaned and dried prior to being returned to the property. This ensures that no lingering issues, such as mold growth, will happen.

Dealing with pipe burst cleanup is an involved and often complex process that requires two phases to ensure the property is restored. Working with a certified professional helps ensure that the damage is minimized and the property properly restored to what it once was.